The Need to Create Norton Ghost Bootable USB
Norton Ghost is one of the best tools that can help us create disk image, backup selected partitions or any important file. And you can boot into the Norton Ghost recovery environment with a recovery disk to restore image backup or troubleshoot other problems.
CD Item Preview There Is No Preview Available For This Item This item does not appear to have any files that can be. Norton Ghost 11.5 Bootable Usb Drivers Constant In Why would you need to do that Norton Ghost is usually a disc cloning and back-up device that will be helpful for all kind of emulations and cd disk creating. Were going to use a few tools specifically developed which will.
To enter the Norton Ghost recovery environment, you can make a recovery disk by clicking Tools >Create Custom Recovery Disk CD. However, it only allows you to create custom recovery disk with CD while there is no built-in CD/DVD drive for most recent computers.
Fortunately, it's possible to create Norton Ghost bootable USB to help you boot into the recovery environment. Check the next part to get the detailed steps.
Method 1: Make Norton Ghost Bootable USB with Command Line
Here in this part, we will tell you how to make Norton Ghost bootable USB in Windows 10/8/7. Although the whole process is kind of complicated, all you need to do is read them through. Or if you prefer an easier way to create bootable USB as well as a free PC backup tool, you can refer to the next part to get it.
To create Norton Ghost bootable USB, first, you should format the USB flash drive to NTFS and then copy the contents of the Norton Ghost recovery disk to the USB. Here we take make Norton Ghost 15 bootable USB as an example.
Notes:
◆ Now you can still download the latest version, Norton Ghost 15. It only offers you the 30-day free trial version and then you need to pay for it.
◆ It will erase all the data on the USB drive, so backup your USB flash drive in advance with USB backup software if there's any important stored on it.
Step 1. Format USB flash drive
1. Insert your USB flash drive and open Command Prompt: type 'cmd' in the search box > right-click Command Prompt and choose 'Run as administrator'.
2. Type 'diskpart' and press Enter to launch the DiskPart utility.
3. Type 'list disk Cloud gaming mac trial free. ' and press Enter to locate the drive number of your flash drive.
4. Enter the following commands one by one and wait for each step to complete. Please remember to replace the 'x' with the USB' s drive number that appeared in the 'list disk' command.
select disk x
clean
create partition primary
select partition 1
active
format fs=ntfs quick
assign
exit
5. Then, the DiskPart utility will close and you will see the standard Windows command prompt. Enter the following commands:
cd 'C:Program Files (x86)Norton GhostAgent'
bootsect /nt60 x:
Notes:
◆ If you installed Norton Ghost in another folder on the hard drive, please type the correct location.
◆ Replace 'x' with the correct letter of your flash drive.
◆ If your computer supports Unified Extensible Firmware Interface (UEFI), you should format the USB flash drive as FAT32 instead of NTFS. To format the partition as FAT32, type format fs=fat32 quick, and then click Enter.
Step 2. Copy the contents of the Norton Ghost recovery disk
Insert the recovery CD and copy of its files to the bootable USB flash drive. Or if the recovery disk is an ISO image file, you can mount the ISO with a virtual drive program and then copy the files to the USB driver.
You can also create and store image backup to that USB, then when your computer goes wrong, you can boot your computer from the USB drive and perform a restore.
Step 3. Boot & restore from Norton Ghost bootable USB
Now you can test the Norton Ghost bootable USB flash drive. Restart your computer and enter the BIOS boot options menu. Choose the bootable USB drive and boot your computer from it.
1. When Ghost launch, click OK to continue.
2. From the menu, click Local >Disk >From Image.
3. Then it will ask for the source image. Choose the image you want to restore.
4. Select the destination drive and OK to confirm.
As you can see, the whole process is kind of time-consuming and you may meet some unexpected errors because of improper operation. And do not forget that it only offers you a 30-day free trial version. Why not try one free Norton Ghost alternative? It offers more powerful backup options compared to Norton Ghost and can help you create bootable USB in only a few clicks.
Method 2: Create Bootable USB Norton Ghost 15 with Format Tool
On internet, some users report that they cannot find a way to run the Ghost utility from USB key, because they don't have a CD drive bay. Now, let's have a closer look at this scenario.
Do you have similar issue? If so, please keep reading below to create bootable USB for Norton Ghost 15.
Step 1. Download the following two archive software and run the format tool as administrator.
USB format tool:
http://www.mediafire.com/download/5c96mceeplyvwhn/Format+USB.rar
USB boot Norton Ghost:
http://www.mediafire.com/download/42914n0asj6bdx6/Usboot+Norton+Ghost.rar
Step 2. Configure USB drive.
Select your USB drive under Device and FAT32 as file system, then tick the format options, Format Device and Create a DOS startup disk, select Boot folder of Boot Norton Ghost by clicking the three dots and click OK. After that, click Start to mount DOS system files.
Step 4. Click Yes when you are asked if you are really want to process with Format. Then, click OK.
Step 5. Copy all the content of Boot Norton Ghost folder without Boot folder, and paste to USB drive.
Norton Ghost 11.5 Bootable Usb Download
Now, you've got a Norton Ghost bootable USB. To boot from it, see Step 3 on the previous part.
Easier way to create bootable USB in Windows 10/8/7
AOMEI Backupper Standard is the best free Norton Ghost alternative. It works well on all Windows OS including Windows 10/8/8.1/7.
It allows you to create bootable USB drive easily. And you can also choose to create an ISO image file so you can burn to any removable devices. Besides, the bootable media is possible to boot any version of Windows.
It helps you create image backup for the system, disk, partition or file. Then when something goes wrong, you can restore computer to an earlier date that works well or recover important data as soon as possible.
How about give it a try? First download and install it on your computer and then follow the steps below to create bootable USB as well as create image backup. Please remember to backup your USB drive in advance, because it will erase all the data.
Create bootable USB drive in simple steps:
Step 1. Run AOMEI Backupper, click Tools and choose Create Bootable Media.
Step 2. Select a type of bootable media you want to create and click Next to continue. For better performance, the Windows PE bootable disc is recommended. Boyz ii men legacy zip lines.
Step 4. Select the USB drive to create this bootable recovery media and then click Next to run this process.
Create image backup for your computer:
Now you have created a bootable USB that can help boot your computer, then you can create system image or other backup types according to your needs. Just choose one backup option and follow the wizard to make it. Besides, you can set scheduled backup to make it auto run daily/weekly/monthly.
Tips: Optionally, you could go to Tools >Recovery Environment to enable the boot option of AOMEI Backupper recovery environment. This way, you could also boot into Windows PE and perform backup/restore with AOMEI Backupper.
Conclusion
Now you know how to make Norton Ghost bootable USB, even for users who don't have CD/DVD drive bay. To make it, first, you should format the USB drive and then copy the needed files.
Or if you prefer an easier way to create bootable USB, AOMEI Backupper Standard can help you make it. It also supports computer backup, restore, and clone just like Norton Ghost. And it's totally free of charge.
select disk x
clean
create partition primary
select partition 1
active
format fs=ntfs quick
assign
exit
5. Then, the DiskPart utility will close and you will see the standard Windows command prompt. Enter the following commands:
cd 'C:Program Files (x86)Norton GhostAgent'
bootsect /nt60 x:
Notes:
◆ If you installed Norton Ghost in another folder on the hard drive, please type the correct location.
◆ Replace 'x' with the correct letter of your flash drive.
◆ If your computer supports Unified Extensible Firmware Interface (UEFI), you should format the USB flash drive as FAT32 instead of NTFS. To format the partition as FAT32, type format fs=fat32 quick, and then click Enter.
Step 2. Copy the contents of the Norton Ghost recovery disk
Insert the recovery CD and copy of its files to the bootable USB flash drive. Or if the recovery disk is an ISO image file, you can mount the ISO with a virtual drive program and then copy the files to the USB driver.
You can also create and store image backup to that USB, then when your computer goes wrong, you can boot your computer from the USB drive and perform a restore.
Step 3. Boot & restore from Norton Ghost bootable USB
Now you can test the Norton Ghost bootable USB flash drive. Restart your computer and enter the BIOS boot options menu. Choose the bootable USB drive and boot your computer from it.
1. When Ghost launch, click OK to continue.
2. From the menu, click Local >Disk >From Image.
3. Then it will ask for the source image. Choose the image you want to restore.
4. Select the destination drive and OK to confirm.
As you can see, the whole process is kind of time-consuming and you may meet some unexpected errors because of improper operation. And do not forget that it only offers you a 30-day free trial version. Why not try one free Norton Ghost alternative? It offers more powerful backup options compared to Norton Ghost and can help you create bootable USB in only a few clicks.
Method 2: Create Bootable USB Norton Ghost 15 with Format Tool
On internet, some users report that they cannot find a way to run the Ghost utility from USB key, because they don't have a CD drive bay. Now, let's have a closer look at this scenario.
Do you have similar issue? If so, please keep reading below to create bootable USB for Norton Ghost 15.
Step 1. Download the following two archive software and run the format tool as administrator.
USB format tool:
http://www.mediafire.com/download/5c96mceeplyvwhn/Format+USB.rar
USB boot Norton Ghost:
http://www.mediafire.com/download/42914n0asj6bdx6/Usboot+Norton+Ghost.rar
Step 2. Configure USB drive.
Select your USB drive under Device and FAT32 as file system, then tick the format options, Format Device and Create a DOS startup disk, select Boot folder of Boot Norton Ghost by clicking the three dots and click OK. After that, click Start to mount DOS system files.
Step 4. Click Yes when you are asked if you are really want to process with Format. Then, click OK.
Step 5. Copy all the content of Boot Norton Ghost folder without Boot folder, and paste to USB drive.
Norton Ghost 11.5 Bootable Usb Download
Now, you've got a Norton Ghost bootable USB. To boot from it, see Step 3 on the previous part.
Easier way to create bootable USB in Windows 10/8/7
AOMEI Backupper Standard is the best free Norton Ghost alternative. It works well on all Windows OS including Windows 10/8/8.1/7.
It allows you to create bootable USB drive easily. And you can also choose to create an ISO image file so you can burn to any removable devices. Besides, the bootable media is possible to boot any version of Windows.
It helps you create image backup for the system, disk, partition or file. Then when something goes wrong, you can restore computer to an earlier date that works well or recover important data as soon as possible.
How about give it a try? First download and install it on your computer and then follow the steps below to create bootable USB as well as create image backup. Please remember to backup your USB drive in advance, because it will erase all the data.
Create bootable USB drive in simple steps:
Step 1. Run AOMEI Backupper, click Tools and choose Create Bootable Media.
Step 2. Select a type of bootable media you want to create and click Next to continue. For better performance, the Windows PE bootable disc is recommended. Boyz ii men legacy zip lines.
Step 4. Select the USB drive to create this bootable recovery media and then click Next to run this process.
Create image backup for your computer:
Now you have created a bootable USB that can help boot your computer, then you can create system image or other backup types according to your needs. Just choose one backup option and follow the wizard to make it. Besides, you can set scheduled backup to make it auto run daily/weekly/monthly.
Tips: Optionally, you could go to Tools >Recovery Environment to enable the boot option of AOMEI Backupper recovery environment. This way, you could also boot into Windows PE and perform backup/restore with AOMEI Backupper.
Conclusion
Now you know how to make Norton Ghost bootable USB, even for users who don't have CD/DVD drive bay. To make it, first, you should format the USB drive and then copy the needed files.
Or if you prefer an easier way to create bootable USB, AOMEI Backupper Standard can help you make it. It also supports computer backup, restore, and clone just like Norton Ghost. And it's totally free of charge.
AOMEI Backupper also provides higher version for advanced users, which have more useful features, such as, incremental and differential backup, USB plug in, Scheme, encryption, and more. Please give it a chance and you will enjoy a better user experience.
Hi,
I merely a user, not a technician just to take a correct option of the 4 available according to the User's Guide within 186 pages, as it is compiled by technicians for technicians. Hence, I have to ask how to just make an image of the whole C:/ disk to retain its ability to boot after I have prepared a disk of the same size (80 Gb) or even doubled 160 Gb.
Which switch option should I preferably take in my case? The description is too much wordy and specific to understand for me. There are 4 options available.
I allow me to cite here the User's Guide:
-ia The image all switch forces Norton Ghost to perform a sector-by-sector copy of all
partitions. When copying a partition from a disk to an image file or to another disk,
Norton Ghost examines the source partition and decides whether to copy just the files and
directory structure, or to do a sector-by-sector copy. If it understands the internal format
of the partition, it defaults to copying the files and directory structure. Generally this is the
best option. However, if a disk has been set up with special hidden security files that are in
specific positions on the partition, the only way to reproduce them accurately on the
target partition is through a sector-by-sector copy. If you use this switch to create an
image of a dynamic disk, then the image must be restored to a disk with identical
geometry.
-ib The image boot switch copies the entire boot track, including the boot sector, when
creating a disk image file or copying disk-to-disk. Use this switch when installed
applications, such as boot-time utilities, use the boot track to store information. By
default, Norton Ghost copies only the boot sector, and does not copy the remainder of the
boot track. You cannot perform partition-to-partition or partition-to-image functions
with the -ib switch.
Download Symantec Ghost 11.5 Booting Usb
Command-line switches 159
-id The image disk switch is similar to -ia (image all), but also copies the boot track, as in -ib
(image boot), extended partition tables, and unpartitioned space on the disk. When
looking at an image with -id, you see the unpartitioned space and extended partitions in
the list of partitions. The -id switch is primarily used by law enforcement agencies that
require forensic images.
When Norton Ghost restores from an -id image, it relocates partitions to cylinder
boundaries and adjusts partition tables accordingly. Head, sector, and cylinder
information in partition tables is adjusted to match the geometry of the destination disk.
Partitions are not resizeable. You will need an identical or larger disk than the original.
Norton Ghost does not wipe the destination disk when restoring from an -id image.
Geometry differences between disks may leave tracks on the destination disk with their
previous contents.
Use the -ia (image all) switch instead of the -id switch when copying partition-to-partition
or partition-to-image. An individual partition can be restored from an image created with
-id.
